The main rason of leading to overhigh hydrogen content was insufficient anneal after forged.
導致氫含量過高的原因可能在於鍛後退火不足。
The resistivity and flexivity of the resistance thermostat metal change while the anneal process change.
當退火工藝變化時,電阻系列熱雙金屬的電阻率和溫曲率等主要性能將產生變化。
It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.
並提出了改進酸洗、磷化、退火及變形工藝的方法。
for case hardening respective decarbonizing respective bright annealing of long rod,bars and or wire bundles.
適於長條料、棒材或金屬線包的表面滲碳、脫碳、光亮退火。
It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.
用熱重分析儀模擬工業退火程序,建立了銅軋製油退火清淨性的評價方法。
According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.
還可根據用戶需要另配在線光亮退火，內壓縫整園等輔助設施。
Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.
重點研究了退化PMOS器件的高場退火效應和氧化層陷阱電子的退陷阱機制。
I conclude that the increase of detwinning stress with annealing temperature results from the surface hardening of the sample due to surface oxidation;
由此實驗現象可以得出結論，文獻報道的去孿晶應力隨着退火溫度升高而升高的現象是由於樣品表面氧化造成的。
AAO is transforming noncrystal to crystal after annealing in 850℃,1000℃,1160℃.The range of utilization is increasing from the pH 5-10 to 2-13.
在對氧化膜在850℃，1000℃，1160℃的條件下進行熱處理後，氧化膜由非晶態向晶態轉變，而且在水溶液中應用範圍也由pH值5-10擴大到2-13。
They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.
這些應用大致涵蓋激光摻雜、激光退火、激光沉積薄膜、激光引發固相反應和激光光刻等幾方面。
First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.
首先，表面的固體冰曾經退火過，也就是說其溫度曾升高至78K以上使無定型冰重新結晶。
It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.
有報道稱Ti-Ni合金的去孿晶應力隨着退火溫度的升高而升高，但是造成這一現象的原因並不清楚。
Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.
世界第一臺鑄造缺陷修補機的研製成功，給鑄造缺陷修復帶來了一次徹底革命！焊補過程中基體不發熱、不變形、無應力、無硬點及退火情況。
The main rason of leading to overhigh hydrogen content was insufficient anneal after forged.
導致氫含量過高的原因可能在於鍛後退火不足。
The resistivity and flexivity of the resistance thermostat metal change while the anneal process change.
當退火工藝變化時,電阻系列熱雙金屬的電阻率和溫曲率等主要性能將產生變化。
It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.
並提出了改進酸洗、磷化、退火及變形工藝的方法。
for case hardening respective decarbonizing respective bright annealing of long rod,bars and or wire bundles.
適於長條料、棒材或金屬線包的表面滲碳、脫碳、光亮退火。
It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.
用熱重分析儀模擬工業退火程序,建立了銅軋製油退火清淨性的評價方法。
According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.
還可根據用戶需要另配在線光亮退火，內壓縫整園等輔助設施。
Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.
重點研究了退化PMOS器件的高場退火效應和氧化層陷阱電子的退陷阱機制。
I conclude that the increase of detwinning stress with annealing temperature results from the surface hardening of the sample due to surface oxidation;
由此實驗現象可以得出結論，文獻報道的去孿晶應力隨着退火溫度升高而升高的現象是由於樣品表面氧化造成的。
AAO is transforming noncrystal to crystal after annealing in 850℃,1000℃,1160℃.The range of utilization is increasing from the pH 5-10 to 2-13.
在對氧化膜在850℃，1000℃，1160℃的條件下進行熱處理後，氧化膜由非晶態向晶態轉變，而且在水溶液中應用範圍也由pH值5-10擴大到2-13。
They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.
這些應用大致涵蓋激光摻雜、激光退火、激光沉積薄膜、激光引發固相反應和激光光刻等幾方面。
First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.
首先，表面的固體冰曾經退火過，也就是說其溫度曾升高至78K以上使無定型冰重新結晶。
It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.
有報道稱Ti-Ni合金的去孿晶應力隨着退火溫度的升高而升高，但是造成這一現象的原因並不清楚。
Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.
世界第一臺鑄造缺陷修補機的研製成功，給鑄造缺陷修復帶來了一次徹底革命！焊補過程中基體不發熱、不變形、無應力、無硬點及退火情況。
探索常見搜尋詞彙