punching bag
沙袋
punching gloves
拳擊手套
punching technique
拳擊技巧
punching machine
衝壓機；鑽孔機；軋切機
punching die
衝孔模，落料模
punching shear
衝切剪力，衝擊剪刀；衝剪應力；衝剪
The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.
分析了接線片的結構特點和衝壓工藝性,介紹了零件的排樣設計方案、模具結構及主要特點。
I will have no one punching anyone else up in my hotel.
在我的旅館裏我不讓任何人動手同別人打架。
The machine can automatically punch or continuously punch and rivet eyelets. The punching and eyeleting can be finished once.
該機具有單打或連續釘打鞋眼、衝孔、打眼一次自動完成。
And sometimes it's stale machismo, a tired belief that rock'n'roll is about getting drunk and punching journalists.
有時候是因爲老掉牙的男子氣概、認爲搖滾就是“爛醉+扁人”的陳腐念頭。
In the thesis the author analyzes the current punching situation of keyseat and mark hole when making electric motor iron core;
分析了電機鐵芯製造時鍵槽、記號孔衝制的現狀;
Later period is OKer, attack goes up still is very powerful, PK, carbon, upgrade, it is brunt artillerist, also be main punching bag of course.
後期就比較可以了，攻擊一上去還是非常強大的，PK、副本、升級，都是主力炮手，當然也是主要攻擊目標。
It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.
設備由主放料架、副放料架、導向機架、成型主機、成型模具、校正機構、衝孔機構、切斷部分、收料臺、電器控制部分等組成。
According to the tractility of Silicon steel sheet,a new processing technics of cutting the narrow-yoke sheet into punching piece and rolling it into motor core was proposed here.
文章根據硅鋼片的可延展性,提出一種窄軛衝片套裁成形成衝片條,再盤捲成電機鐵心的工藝方法。
High processing accuracy due to super precision linear motion pair adopted in mobbing parts. Used for corner punching and riveting combination of aluminum window and door.
同時對門窗的兩個角進行加工,加工效率高,採用柱塞式液壓系統,噪音小,運行平穩。
This paper mainly discusses subjects such asprocessing,technology of pole coil wind ing,forming,manufacturing lead,punching,dove-tail groove,insulating,heat pr essing,encircling slot,etc.
本文主要研究了磁極線圈繞線、整型、引線製做、鴿尾槽衝制、絕緣、熱壓、圍帶槽加工工藝等方面內容。
Shall consist of clean, unalloyed, uncoated copper scrap clippings, punchings, bus bars, commutator segments and wire not less than 1/16 of the inch thick, free o burnt wire which is brittle;
此銅線要求是乾淨的，未經包裹的純粹銅片、銅屑、汽車門閂、換向器切片，且銅線的厚度不少於1/16英寸，免燒易碎的銅線；
punching bag
沙袋
punching gloves
拳擊手套
punching technique
拳擊技巧
punching machine
衝壓機；鑽孔機；軋切機
punching die
衝孔模，落料模
punching shear
衝切剪力，衝擊剪刀；衝剪應力；衝剪
The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.
分析了接線片的結構特點和衝壓工藝性,介紹了零件的排樣設計方案、模具結構及主要特點。
I will have no one punching anyone else up in my hotel.
在我的旅館裏我不讓任何人動手同別人打架。
The machine can automatically punch or continuously punch and rivet eyelets. The punching and eyeleting can be finished once.
該機具有單打或連續釘打鞋眼、衝孔、打眼一次自動完成。
And sometimes it's stale machismo, a tired belief that rock'n'roll is about getting drunk and punching journalists.
有時候是因爲老掉牙的男子氣概、認爲搖滾就是“爛醉+扁人”的陳腐念頭。
In the thesis the author analyzes the current punching situation of keyseat and mark hole when making electric motor iron core;
分析了電機鐵芯製造時鍵槽、記號孔衝制的現狀;
Later period is OKer, attack goes up still is very powerful, PK, carbon, upgrade, it is brunt artillerist, also be main punching bag of course.
後期就比較可以了，攻擊一上去還是非常強大的，PK、副本、升級，都是主力炮手，當然也是主要攻擊目標。
It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.
設備由主放料架、副放料架、導向機架、成型主機、成型模具、校正機構、衝孔機構、切斷部分、收料臺、電器控制部分等組成。
According to the tractility of Silicon steel sheet,a new processing technics of cutting the narrow-yoke sheet into punching piece and rolling it into motor core was proposed here.
文章根據硅鋼片的可延展性,提出一種窄軛衝片套裁成形成衝片條,再盤捲成電機鐵心的工藝方法。
High processing accuracy due to super precision linear motion pair adopted in mobbing parts. Used for corner punching and riveting combination of aluminum window and door.
同時對門窗的兩個角進行加工,加工效率高,採用柱塞式液壓系統,噪音小,運行平穩。
This paper mainly discusses subjects such asprocessing,technology of pole coil wind ing,forming,manufacturing lead,punching,dove-tail groove,insulating,heat pr essing,encircling slot,etc.
本文主要研究了磁極線圈繞線、整型、引線製做、鴿尾槽衝制、絕緣、熱壓、圍帶槽加工工藝等方面內容。
Shall consist of clean, unalloyed, uncoated copper scrap clippings, punchings, bus bars, commutator segments and wire not less than 1/16 of the inch thick, free o burnt wire which is brittle;
此銅線要求是乾淨的，未經包裹的純粹銅片、銅屑、汽車門閂、換向器切片，且銅線的厚度不少於1/16英寸，免燒易碎的銅線；
探索常見搜尋詞彙